dmesg - NVIDIA Quadro RTX 5000
Linux version 5.6.0-1048-oem (buildd@lgw01-amd64-010) (gcc version 9.3.0 (Ubuntu 9.3.0-17ubuntu1~20.04)) #52-Ubuntu SMP Thu Feb 18 11:37:00 UTC 2021 (Ubuntu 5.6.0-1048.52-oem 5.6.19)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Hygon HygonGenuine
Centaur CentaurHauls
zhaoxin Shanghai
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
x86/fpu: xstate_offset[9]: 960, xstate_sizes[9]: 8
x86/fpu: Enabled xstate features 0x21f, context size is 968 bytes, using 'compacted' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
BIOS-e820: [mem 0x000000000009e000-0x000000000009efff] reserved
BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000003fffffff] usable
BIOS-e820: [mem 0x0000000040000000-0x00000000403fffff] reserved
BIOS-e820: [mem 0x0000000040400000-0x0000000087c3afff] usable
BIOS-e820: [mem 0x0000000087c3b000-0x0000000087c3bfff] ACPI NVS
BIOS-e820: [mem 0x0000000087c3c000-0x0000000087c5efff] usable
BIOS-e820: [mem 0x0000000087c5f000-0x0000000087c5ffff] reserved
BIOS-e820: [mem 0x0000000087c60000-0x00000000915bffff] usable
BIOS-e820: [mem 0x00000000915c0000-0x0000000099e22fff] reserved
BIOS-e820: [mem 0x0000000099e23000-0x0000000099f52fff] ACPI data
BIOS-e820: [mem 0x0000000099f53000-0x000000009a1b7fff] ACPI NVS
BIOS-e820: [mem 0x000000009a1b8000-0x000000009adfefff] reserved
BIOS-e820: [mem 0x000000009adff000-0x000000009adfffff] usable
BIOS-e820: [mem 0x000000009ae00000-0x000000009f7fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000105c7fffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0x860a8018-0x860c7a57] usable ==> usable
e820: update [mem 0x860a8018-0x860c7a57] usable ==> usable
e820: update [mem 0x8a209018-0x8a219457] usable ==> usable
e820: update [mem 0x8a209018-0x8a219457] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000009dfff] usable
reserve setup_data: [mem 0x000000000009e000-0x000000000009efff] reserved
reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] usable
reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x000000003fffffff] usable
reserve setup_data: [mem 0x0000000040000000-0x00000000403fffff] reserved
reserve setup_data: [mem 0x0000000040400000-0x00000000860a8017] usable
reserve setup_data: [mem 0x00000000860a8018-0x00000000860c7a57] usable
reserve setup_data: [mem 0x00000000860c7a58-0x0000000087c3afff] usable
reserve setup_data: [mem 0x0000000087c3b000-0x0000000087c3bfff] ACPI NVS
reserve setup_data: [mem 0x0000000087c3c000-0x0000000087c5efff] usable
reserve setup_data: [mem 0x0000000087c5f000-0x0000000087c5ffff] reserved
reserve setup_data: [mem 0x0000000087c60000-0x000000008a209017] usable
reserve setup_data: [mem 0x000000008a209018-0x000000008a219457] usable
reserve setup_data: [mem 0x000000008a219458-0x00000000915bffff] usable
reserve setup_data: [mem 0x00000000915c0000-0x0000000099e22fff] reserved
reserve setup_data: [mem 0x0000000099e23000-0x0000000099f52fff] ACPI data
reserve setup_data: [mem 0x0000000099f53000-0x000000009a1b7fff] ACPI NVS
reserve setup_data: [mem 0x000000009a1b8000-0x000000009adfefff] reserved
reserve setup_data: [mem 0x000000009adff000-0x000000009adfffff] usable
reserve setup_data: [mem 0x000000009ae00000-0x000000009f7fffff] reserved
reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000105c7fffff] usable
efi: EFI v2.70 by American Megatrends
efi: ACPI=0x99f52000 ACPI 2.0=0x99f52014 TPMFinalLog=0x9a0e4000 SMBIOS=0x9a8be000 SMBIOS 3.0=0x9a8bd000 MEMATTR=0x8bf14018 ESRT=0x8f200e18 RNG=0x9a8d7a98 TPMEventLog=0x8a240018
efi: seeding entropy pool
random: fast init done
secureboot: Secure boot disabled
SMBIOS 3.2.0 present.
DMI: LENOVO 30DH00H9CR/1048, BIOS S08KT35A 01/20/2021
tsc: Detected 3700.000 MHz processor
tsc: Detected 3699.850 MHz TSC
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x105c800 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00C0000000 mask 7FC0000000 uncachable
1 base 00A0000000 mask 7FE0000000 uncachable
2 base 009E000000 mask 7FFE000000 uncachable
3 base 009D000000 mask 7FFF000000 uncachable
4 base 2000000000 mask 6000000000 uncachable
5 base 4000000000 mask 4000000000 uncachable
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
last_pfn = 0x9ae00 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x000000008f200e18 to 0x000000008f200ec8.
e820: update [mem 0x8f200000-0x8f200fff] usable ==> reserved
check: Scanning 1 areas for low memory corruption
Using GB pages for direct mapping
BRK [0xf52601000, 0xf52601fff] PGTABLE
BRK [0xf52602000, 0xf52602fff] PGTABLE
BRK [0xf52603000, 0xf52603fff] PGTABLE
BRK [0xf52604000, 0xf52604fff] PGTABLE
BRK [0xf52605000, 0xf52605fff] PGTABLE
BRK [0xf52606000, 0xf52606fff] PGTABLE
BRK [0xf52607000, 0xf52607fff] PGTABLE
BRK [0xf52608000, 0xf52608fff] PGTABLE
BRK [0xf52609000, 0xf52609fff] PGTABLE
BRK [0xf5260a000, 0xf5260afff] PGTABLE
BRK [0xf5260b000, 0xf5260bfff] PGTABLE
secureboot: Secure boot disabled
RAMDISK: [mem 0x1b04c000-0x1e172fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x0000000099F52014 000024 (v02 LENOVO)
ACPI: XSDT 0x0000000099F51728 0000EC (v01 LENOVO TC-S08 00001350 AMI 01000013)
ACPI: FACP 0x0000000099F4C000 000114 (v06 LENOVO TC-S08 00001350 AMI 00010013)
ACPI: DSDT 0x0000000099EFE000 04D11D (v02 LENOVO TC-S08 00001350 INTL 20160527)
ACPI: FACS 0x000000009A1B5000 000040
ACPI: MCFG 0x0000000099F50000 00003C (v01 LENOVO TC-S08 00001350 MSFT 00000097)
ACPI: SSDT 0x0000000099F4D000 00203C (v02 LENOVO TC-S08 00001350 INTL 20160527)
ACPI: FIDT 0x0000000099EFD000 00009C (v01 LENOVO TC-S08 00001350 AMI 00010013)
ACPI: MSDM 0x0000000099EFC000 000055 (v03 LENOVO TC-S08 00001350 AMI 00010013)
ACPI: SSDT 0x0000000099EFB000 0003A3 (v01 LENOVO TC-S08 00001350 INTL 20160527)
ACPI: SSDT 0x0000000099EF7000 0031DA (v02 LENOVO TC-S08 00001350 INTL 20160527)
ACPI: SSDT 0x0000000099EF4000 002764 (v02 LENOVO TC-S08 00001350 INTL 20160527)
ACPI: HPET 0x0000000099EF3000 000038 (v01 LENOVO TC-S08 00001350 AMI 01000013)
ACPI: SSDT 0x0000000099EF1000 00147B (v02 LENOVO TC-S08 00001350 INTL 20160527)
ACPI: SSDT 0x0000000099EED000 003332 (v02 LENOVO TC-S08 00001350 INTL 20160527)
ACPI: NHLT 0x0000000099EEB000 001821 (v00 LENOVO TC-S08 00001350 AMI 01000013)
ACPI: LPIT 0x0000000099EEA000 000094 (v01 LENOVO TC-S08 00001350 AMI 01000013)
ACPI: SSDT 0x0000000099EE6000 0025B2 (v02 LENOVO TC-S08 00001350 INTL 20160527)
ACPI: DBGP 0x0000000099EE5000 000034 (v01 LENOVO TC-S08 00001350 AMI 01000013)
ACPI: DBG2 0x0000000099EE4000 000054 (v00 LENOVO TC-S08 00001350 AMI 01000013)
ACPI: SSDT 0x0000000099EE2000 001B67 (v02 LENOVO TC-S08 00001350 INTL 20160527)
ACPI: BGRT 0x0000000099EE0000 000038 (v01 LENOVO TC-S08 00001350 AMI 00010013)
ACPI: LUFT 0x0000000099EAB000 034CC2 (v01 LENOVO TC-S08 00001350 AMI 00010013)
ACPI: TPM2 0x0000000099EAA000 00004C (v04 LENOVO TC-S08 00001350 AMI 00000000)
ACPI: DMAR 0x0000000099EE1000 0000C8 (v01 LENOVO TC-S08 00001350 01000013)
ACPI: ASF! 0x0000000099EA9000 000074 (v32 LENOVO TC-S08 00001350 AMI 01000013)
ACPI: WSMT 0x0000000099EE9000 000028 (v01 LENOVO TC-S08 00001350 AMI 00010013)
ACPI: APIC 0x0000000099EA8000 000164 (v04 LENOVO TC-S08 00001350 AMI 00010013)
ACPI: FPDT 0x0000000099EA7000 000044 (v01 LENOVO TC-S08 00001350 AMI 01000013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000105c7fffff]
NODE_DATA(0) allocated [mem 0x105c7d6000-0x105c7fffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000105c7fffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009dfff]
node 0: [mem 0x000000000009f000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x000000003fffffff]
node 0: [mem 0x0000000040400000-0x0000000087c3afff]
node 0: [mem 0x0000000087c3c000-0x0000000087c5efff]
node 0: [mem 0x0000000087c60000-0x00000000915bffff]
node 0: [mem 0x000000009adff000-0x000000009adfffff]
node 0: [mem 0x0000000100000000-0x000000105c7fffff]
Zeroed struct page in unavailable ranges: 75427 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000105c7fffff]
On node 0 totalpages: 16701789
DMA zone: 64 pages used for memmap
DMA zone: 280 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 9223 pages used for memmap
DMA32 zone: 590271 pages, LIFO batch:63
Normal zone: 251680 pages used for memmap
Normal zone: 16107520 pages, LIFO batch:63
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
e820: update [mem 0x8c5d7000-0x8c61ffff] usable ==> reserved
smpboot: Allowing 20 CPUs, 0 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0x40000000-0x403fffff]
PM: hibernation: Registered nosave memory: [mem 0x860a8000-0x860a8fff]
PM: hibernation: Registered nosave memory: [mem 0x860c7000-0x860c7fff]
PM: hibernation: Registered nosave memory: [mem 0x87c3b000-0x87c3bfff]
PM: hibernation: Registered nosave memory: [mem 0x87c5f000-0x87c5ffff]
PM: hibernation: Registered nosave memory: [mem 0x8a209000-0x8a209fff]
PM: hibernation: Registered nosave memory: [mem 0x8a219000-0x8a219fff]
PM: hibernation: Registered nosave memory: [mem 0x8c5d7000-0x8c61ffff]
PM: hibernation: Registered nosave memory: [mem 0x8f200000-0x8f200fff]
PM: hibernation: Registered nosave memory: [mem 0x915c0000-0x99e22fff]
PM: hibernation: Registered nosave memory: [mem 0x99e23000-0x99f52fff]
PM: hibernation: Registered nosave memory: [mem 0x99f53000-0x9a1b7fff]
PM: hibernation: Registered nosave memory: [mem 0x9a1b8000-0x9adfefff]
PM: hibernation: Registered nosave memory: [mem 0x9ae00000-0x9f7fffff]
PM: hibernation: Registered nosave memory: [mem 0x9f800000-0xdfffffff]
PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0x9f800000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:20 nr_cpu_ids:20 nr_node_ids:1
percpu: Embedded 57 pages/cpu s196608 r8192 d28672 u262144
pcpu-alloc: s196608 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 -- -- -- --
Built 1 zonelists, mobility grouping on. Total pages: 16440542
Policy zone: Normal
Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes, linear)
Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
mem auto-init: stack:off, heap alloc:on, heap free:off
Memory: 65408252K/66807156K available (14339K kernel code, 2550K rwdata, 5192K rodata, 2568K init, 4984K bss, 1398904K reserved, 0K cma-reserved)
random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=1
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=20, Nodes=1
ftrace: allocating 45005 entries in 176 pages
ftrace: allocated 176 pages with 3 groups
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=20.
Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=20
NR_IRQS: 524544, nr_irqs: 2216, preallocated irqs: 16
random: crng done (trusting CPU's manufacturer)
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20200110
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x0000009a64b000 end: 0x0000009a894fff
DMAR: RMRR base: 0x0000009d000000 end: 0x0000009f7fffff
DMAR: RMRR base: 0x00000099d54000 end: 0x00000099dd3fff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x6aa99074b1c, max_idle_ns: 881590506587 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 7399.70 BogoMIPS (lpj=14799400)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
*** VALIDATE tmpfs ***
*** VALIDATE proc ***
*** VALIDATE cgroup ***
*** VALIDATE cgroup2 ***
mce: CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Enhanced IBRS
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
Freeing SMP alternatives memory: 40K
smpboot: CPU0: Intel(R) Core(TM) i9-10900K CPU @ 3.70GHz (family: 0x6, model: 0xa5, stepping: 0x5)
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15 #16 #17 #18 #19
smp: Brought up 1 node, 20 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 20 processors activated (147994.00 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x87c3b000-0x87c3bfff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x99f53000-0x9a1b7fff] (2510848 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 8192 (order: 7, 524288 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 22:16:46, date: 2021-03-13
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1615673806.060:1): state=initialized audit_enabled=0 res=1
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: Added _OSI(Linux-Dell-USB4-Wakeup)
ACPI: 9 ACPI AML tables successfully acquired and loaded
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFA10B1410D200 0000FC (v02 PmRef Cpu0Psd 00003000 INTL 20160527)
ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFA10B14123800 000400 (v02 PmRef Cpu0Cst 00003001 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFA10B1539F800 0006EC (v02 PmRef Cpu0Ist 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFA10B147E2000 00016C (v02 PmRef Cpu0Hwp 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFA10B140C5000 000BEA (v02 PmRef HwpLvt 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFA10B1539F000 000778 (v02 PmRef ApIst 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFA10B14126000 0003D7 (v02 PmRef ApHwp 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFA10B140C1000 000D22 (v02 PmRef ApPsd 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFA10B14124400 0003CA (v02 PmRef ApCst 00003000 INTL 20160527)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 8 GPEs in block 00 to 7F
ACPI: Power Resource [USBC] (on)
ACPI: Power Resource [V0PR] (on)
ACPI: Power Resource [V1PR] (on)
ACPI: Power Resource [V2PR] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: Power Resource [PIN] (off)
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: root bus resource [mem 0x9f800000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window]
pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:9b33] type 00 class 0x060000
pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:9bc5] type 00 class 0x038000
pci 0000:00:02.0: reg 0x10: [mem 0x6013000000-0x6013ffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0x4000000000-0x400fffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
pci 0000:00:08.0: reg 0x10: [mem 0x601411a000-0x601411afff 64bit]
pci 0000:00:12.0: [8086:06f9] type 00 class 0x118000
pci 0000:00:12.0: reg 0x10: [mem 0x6014119000-0x6014119fff 64bit]
pci 0000:00:14.0: [8086:06ed] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0x6014100000-0x601410ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.2: [8086:06ef] type 00 class 0x050000
pci 0000:00:14.2: reg 0x10: [mem 0x6014114000-0x6014115fff 64bit]
pci 0000:00:14.2: reg 0x18: [mem 0x6014118000-0x6014118fff 64bit]
pci 0000:00:16.0: [8086:06e0] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0x6014117000-0x6014117fff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:06d2] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xa1220000-0xa1221fff]
pci 0000:00:17.0: reg 0x14: [mem 0xa1223000-0xa12230ff]
pci 0000:00:17.0: reg 0x18: [io 0x4090-0x4097]
pci 0000:00:17.0: reg 0x1c: [io 0x4080-0x4083]
pci 0000:00:17.0: reg 0x20: [io 0x4060-0x407f]
pci 0000:00:17.0: reg 0x24: [mem 0xa1222000-0xa12227ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1b.0: [8086:06ac] type 01 class 0x060400
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: Intel SPT PCH root port ACS workaround enabled
pci 0000:00:1b.0: PTM enabled (root), 4ns granularity
pci 0000:00:1f.0: [8086:0697] type 00 class 0x060100
pci 0000:00:1f.3: [8086:06c8] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0x6014110000-0x6014113fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0x6014000000-0x60140fffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.4: [8086:06a3] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0x6014116000-0x60141160ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf]
pci 0000:00:1f.5: [8086:06a4] type 00 class 0x0c8000
pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
pci 0000:00:1f.6: [8086:0d4c] type 00 class 0x020000
pci 0000:00:1f.6: reg 0x10: [mem 0xa1200000-0xa121ffff]
pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: [10de:1eb0] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xa0000000-0xa0ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0x6000000000-0x600fffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0x6010000000-0x6011ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0x3000-0x307f]
pci 0000:01:00.0: reg 0x30: [mem 0xa1000000-0xa107ffff pref]
pci 0000:01:00.0: BAR 1: assigned to efifb
pci 0000:01:00.0: PME# supported from D0 D3hot
pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x16 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8 GT/s x16 link)
pci 0000:01:00.1: [10de:10f8] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xa1080000-0xa1083fff]
pci 0000:01:00.2: [10de:1ad8] type 00 class 0x0c0330
pci 0000:01:00.2: reg 0x10: [mem 0x6012000000-0x601203ffff 64bit pref]
pci 0000:01:00.2: reg 0x1c: [mem 0x6012040000-0x601204ffff 64bit pref]
pci 0000:01:00.2: PME# supported from D0 D3hot
pci 0000:01:00.3: [10de:1ad9] type 00 class 0x0c8000
pci 0000:01:00.3: reg 0x10: [mem 0xa1084000-0xa1084fff]
pci 0000:01:00.3: PME# supported from D0 D3hot
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:01.0: bridge window [mem 0xa0000000-0xa10fffff]
pci 0000:00:01.0: bridge window [mem 0x6000000000-0x60120fffff 64bit pref]
pci 0000:02:00.0: [144d:a808] type 00 class 0x010802
pci 0000:02:00.0: reg 0x10: [mem 0xa1100000-0xa1103fff 64bit]
pci 0000:00:1b.0: PCI bridge to [bus 02]
pci 0000:00:1b.0: bridge window [mem 0xa1100000-0xa11fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *1
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0
ERROR: Unable to locate IOAPIC for GSI -1
iommu: Default domain type: Translated
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
pci 0000:01:00.0: vgaarb: bridge control possible
pci 0000:01:00.0: vgaarb: setting as boot device
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
e820: reserve RAM buffer [mem 0x860a8018-0x87ffffff]
e820: reserve RAM buffer [mem 0x87c3b000-0x87ffffff]
e820: reserve RAM buffer [mem 0x87c5f000-0x87ffffff]
e820: reserve RAM buffer [mem 0x8a209018-0x8bffffff]
e820: reserve RAM buffer [mem 0x8c5d7000-0x8fffffff]
e820: reserve RAM buffer [mem 0x8f200000-0x8fffffff]
e820: reserve RAM buffer [mem 0x915c0000-0x93ffffff]
e820: reserve RAM buffer [mem 0x9ae00000-0x9bffffff]
e820: reserve RAM buffer [mem 0x105c800000-0x105fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource tsc-early
*** VALIDATE bpf ***
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
*** VALIDATE ramfs ***
*** VALIDATE hugetlbfs ***
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0x40000000-0x403fffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io 0x0a00-0x0a0f] has been reserved
system 00:01: [io 0x0a10-0x0a1f] has been reserved
system 00:01: [io 0x0a20-0x0a2f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0680-0x069f] has been reserved
system 00:02: [io 0x164e-0x164f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io 0x1854-0x1857] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:04: [io 0x1800-0x18fe] could not be reserved
system 00:04: [mem 0xfd000000-0xfd69ffff] has been reserved
system 00:04: [mem 0xfd6c0000-0xfd6cffff] has been reserved
system 00:04: [mem 0xfd6f0000-0xfdffffff] has been reserved
system 00:04: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:04: [mem 0xfe200000-0xfe7fffff] has been reserved
system 00:04: [mem 0xff000000-0xffffffff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [io 0x2000-0x20fe] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xfe038000-0xfe038fff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 8 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:01.0: bridge window [mem 0xa0000000-0xa10fffff]
pci 0000:00:01.0: bridge window [mem 0x6000000000-0x60120fffff 64bit pref]
pci 0000:00:1b.0: PCI bridge to [bus 02]
pci 0000:00:1b.0: bridge window [mem 0xa1100000-0xa11fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: resource 8 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: resource 9 [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: resource 10 [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: resource 11 [mem 0x9f800000-0xdfffffff window]
pci_bus 0000:00: resource 12 [mem 0x4000000000-0x7fffffffff window]
pci_bus 0000:00: resource 13 [mem 0xfc800000-0xfe7fffff window]
pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0xa0000000-0xa10fffff]
pci_bus 0000:01: resource 2 [mem 0x6000000000-0x60120fffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xa1100000-0xa11fffff]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 32768 (order: 7, 524288 bytes, linear)
TCP established hash table entries: 524288 (order: 10, 4194304 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 524288 bind 65536)
UDP hash table entries: 32768 (order: 8, 1048576 bytes, linear)
UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
pci 0000:01:00.2: D0 power state depends on 0000:01:00.0
pci 0000:01:00.3: D0 power state depends on 0000:01:00.0
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 50332K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x820a8000-0x860a8000] (64MB)
platform rtc_cmos: registered platform RTC device (no PNP device found)
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=24 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.31)
*** VALIDATE fuseblk ***
*** VALIDATE fuse ***
Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
io scheduler mq-deadline registered
pcieport 0000:00:01.0: PME: Signaling with IRQ 122
pcieport 0000:00:01.0: AER: enabled with IRQ 122
pcieport 0000:00:1b.0: PME: Signaling with IRQ 123
pcieport 0000:00:1b.0: AER: enabled with IRQ 123
pcieport 0000:00:1b.0: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
efifb: probing for efifb
efifb: showing boot graphics
efifb: framebuffer at 0x6000000000, using 9600k, total 9600k
efifb: mode is 1920x1200x32, linelength=8192, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
fbcon: Deferring console take-over
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x11142120
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: \_SB_.PR00: Found 3 idle states
intel_idle: v0.4.1 model 0xA5
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
Linux agpgart interface v0.103
tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1B, rev-id 22)
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
VFIO - User Level meta-driver version: 0.3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 5.6.0-1048-oem xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 16 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.06
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.6.0-1048-oem xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
usb: port power management may be unreliable
xhci_hcd 0000:01:00.2: xHCI Host Controller
xhci_hcd 0000:01:00.2: new USB bus registered, assigned bus number 3
xhci_hcd 0000:01:00.2: hcc params 0x0180ff05 hci version 0x110 quirks 0x0000000000000010
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 5.6.0-1048-oem xhci-hcd
usb usb3: SerialNumber: 0000:01:00.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:01:00.2: xHCI Host Controller
xhci_hcd 0000:01:00.2: new USB bus registered, assigned bus number 4
xhci_hcd 0000:01:00.2: Host supports USB 3.1 Enhanced SuperSpeed
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.06
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 5.6.0-1048-oem xhci-hcd
usb usb4: SerialNumber: 0000:01:00.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos rtc_cmos: RTC can wake from S4
rtc_cmos rtc_cmos: registered as rtc0
rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
intel_pstate: Intel P-state driver initializing
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
intel_pmc_core INT33A1:00: initialized
drop_monitor: Initializing network drop monitor service
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: sig=0xa0655, pf=0x2, revision=0xe0
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
sched_clock: Marking stable (893781658, 628068)->(903471639, -9061913)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 8cd1d29a0735c7d83fb6e80fe48175bea16dd3b4'
zswap: loaded using pool lzo/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
Key type fscrypt-provisioning registered
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Lenovo UEFI CA 2014: 4b91a68732eaefdd2c8ffffc6b027ec3449e9c8f'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Trust - Lenovo Certificate: bc19ccf68446c18b4a08dce9b1cb4deb'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
integrity: Loading X.509 certificate: UEFI:MokListRT
integrity: Loaded X.509 cert 'ubuntu Secure Boot Module Signature key: 548d4b9a0c67e25de7d2a796e7d674403e18792c'
integrity: Loading X.509 certificate: UEFI:MokListRT
integrity: Loaded X.509 cert 'SomeOrg: shim: a01ee84e9b37ace407961cc468c5909447878469'
integrity: Loading X.509 certificate: UEFI:MokListRT
integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
ima: Allocated hash algorithm: sha1
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM: Magic number: 13:13:300
rtc_cmos rtc_cmos: setting system clock to 2021-03-13T22:16:47 UTC (1615673807)
Freeing unused decrypted memory: 2040K
Freeing unused kernel image (initmem) memory: 2568K
Write protecting the kernel read-only data: 22528k
Freeing unused kernel image (text/rodata gap) memory: 2044K
Freeing unused kernel image (rodata/data gap) memory: 952K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
with arguments:
/init
splash
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/vmlinuz-5.6.0-1048-oem
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
acpi PNP0C14:03: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
acpi PNP0C14:04: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
nvidia-gpu 0000:01:00.3: enabling device (0000 -> 0002)
i801_smbus 0000:00:1f.4: SPD Write Disable is set
i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
ahci 0000:00:17.0: version 3.0
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
nvme nvme0: pci function 0000:02:00.0
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0xf impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part ems deso sadm sds apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
ata1: SATA max UDMA/133 abar m2048@0xa1222000 port 0xa1222100 irq 127
ata2: SATA max UDMA/133 abar m2048@0xa1222000 port 0xa1222180 irq 127
ata3: SATA max UDMA/133 abar m2048@0xa1222000 port 0xa1222200 irq 127
ata4: SATA max UDMA/133 abar m2048@0xa1222000 port 0xa1222280 irq 127
e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
usb 1-3: new full-speed USB device number 2 using xhci_hcd
e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 2c:f0:5d:45:b7:4f
e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:1f.6 eth0: MAC: 13, PHY: 12, PBA No: FFFFFF-0FF
e1000e 0000:00:1f.6 eno1: renamed from eth0
nvme nvme0: missing or invalid SUBNQN field.
nvme nvme0: Shutdown timeout set to 8 seconds
nvme nvme0: 20/0/0 default/read/poll queues
usb 1-3: New USB device found, idVendor=046d, idProduct=c33a, bcdDevice=14.00
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: Product: G413 Carbon Mechanical Gaming Keyboard
usb 1-3: Manufacturer: Logitech
usb 1-3: SerialNumber: 0C6339583837
nvme0n1: p1 p2 p3 p4
ata3: SATA link down (SStatus 4 SControl 300)
ata2: SATA link down (SStatus 4 SControl 300)
ata1: SATA link down (SStatus 4 SControl 300)
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata4.00: ATAPI: HL-DT-ST DVDRAM GUE0N, T.02, max UDMA/33
usb 1-6: new high-speed USB device number 3 using xhci_hcd
ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata4.00: configured for UDMA/33
scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GUE0N T.02 PQ: 0 ANSI: 5
sr 3:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg0 type 5
usb 1-6: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3
usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-7: new high-speed USB device number 4 using xhci_hcd
tsc: Refined TSC clocksource calibration: 3696.097 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6a8ddf01081, max_idle_ns: 881590679488 ns
clocksource: Switched to clocksource tsc
usb 1-7: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3
usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-7:1.0: USB hub found
hub 1-7:1.0: 4 ports detected
usb 1-6.1: new full-speed USB device number 5 using xhci_hcd
usb 1-6.1: New USB device found, idVendor=056a, idProduct=0314, bcdDevice= 1.00
usb 1-6.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-6.1: Product: Intuos5 touch S
usb 1-6.1: Manufacturer: Wacom Co.,Ltd.
usb 1-9: new high-speed USB device number 6 using xhci_hcd
usb 1-9: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60
usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-9: Product: USB2.0-CRW
usb 1-9: Manufacturer: Generic
usb 1-9: SerialNumber: 20100201396000000
hid: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver rtsx_usb
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech G413 Carbon Mechanical Gaming Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:046D:C33A.0001/input/input4
hid-generic 0003:046D:C33A.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech G413 Carbon Mechanical Gaming Keyboard] on usb-0000:00:14.0-3/input0
input: Logitech G413 Carbon Mechanical Gaming Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:046D:C33A.0002/input/input5
usb 1-6.2: new high-speed USB device number 7 using xhci_hcd
input: Logitech G413 Carbon Mechanical Gaming Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:046D:C33A.0002/input/input6
hid-generic 0003:046D:C33A.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech G413 Carbon Mechanical Gaming Keyboard] on usb-0000:00:14.0-3/input1
hid-generic 0003:056A:0314.0003: hiddev1,hidraw2: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos5 touch S] on usb-0000:00:14.0-6.1/input0
hid-generic 0003:056A:0314.0004: hiddev2,hidraw3: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos5 touch S] on usb-0000:00:14.0-6.1/input1
input: Wacom Co.,Ltd. Intuos5 touch S as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.1/1-6.1:1.2/0003:056A:0314.0005/input/input9
hid-generic 0003:056A:0314.0005: input,hidraw4: USB HID v1.10 Mouse [Wacom Co.,Ltd. Intuos5 touch S] on usb-0000:00:14.0-6.1/input2
input: Wacom Intuos Pro S Pen as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.1/1-6.1:1.0/0003:056A:0314.0003/input/input10
input: Wacom Intuos Pro S Pad as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.1/1-6.1:1.0/0003:056A:0314.0003/input/input12
wacom 0003:056A:0314.0003: hidraw2: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos5 touch S] on usb-0000:00:14.0-6.1/input0
input: Wacom Intuos Pro S Finger as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.1/1-6.1:1.1/0003:056A:0314.0004/input/input14
wacom 0003:056A:0314.0004: hidraw3: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos5 touch S] on usb-0000:00:14.0-6.1/input1
fbcon: Taking over console
Console: switching to colour frame buffer device 240x75
EXT4-fs (nvme0n1p3): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: Inserted module 'autofs4'
usb 1-7.4: new full-speed USB device number 8 using xhci_hcd
systemd[1]: systemd 245.4-4ubuntu3.4 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
usb 1-7.4: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.07
usb 1-7.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-7.4: Product: USB Receiver
usb 1-7.4: Manufacturer: Logitech
systemd[1]: /lib/systemd/system/rpc-statd.service:16: PIDFile= references a path below legacy directory /var/run/, updating /var/run/rpc.statd.pid → /run/rpc.statd.pid; please update the unit file accordingly.
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7.4/1-7.4:1.0/0003:046D:C52B.0006/input/input16
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Slices.
systemd[1]: Listening on RPCbind Server Activation Socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting NFSD configuration filesystem...
systemd[1]: Mounting RPC Pipe File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Journal Service...
systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting udev Coldplug all Devices...
FS-Cache: Loaded
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Create list of static device nodes for the current kernel.
systemd[1]: Finished Uncomplicated firewall.
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
systemd[1]: Mounted RPC Pipe File System.
systemd[1]: Starting pNFS block layout mapping daemon...
systemd[1]: modprobe@drm.service: Succeeded.
systemd[1]: Finished Load Kernel Module drm.
systemd[1]: Started pNFS block layout mapping daemon.
EXT4-fs (nvme0n1p3): re-mounted. Opts: errors=remount-ro
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
lp: driver loaded but no devices found
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting Create System Users...
ppdev: user-space parallel port driver
systemd[1]: Finished Load Kernel Modules.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounting Kernel Configuration File System...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Mounted Kernel Configuration File System.
systemd[1]: Finished Create System Users.
FS-Cache: Netfs 'nfs' registered for caching
systemd[1]: Starting Create Static Device Nodes in /dev...
*** VALIDATE nfs ***
*** VALIDATE nfs4 ***
systemd[1]: Finished Load/Save Random Seed.
systemd[1]: Finished Apply Kernel Variables.
systemd[1]: Finished Create Static Device Nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Finished Set the console keyboard layout.
systemd[1]: Reached target Local File Systems (Pre).
systemd[1]: Started Journal Service.
hid-generic 0003:046D:C52B.0006: input,hidraw4: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-7.4/input0
systemd-journald[417]: Received client request to flush runtime journal.
input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7.4/1-7.4:1.1/0003:046D:C52B.0007/input/input17
input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7.4/1-7.4:1.1/0003:046D:C52B.0007/input/input18
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7.4/1-7.4:1.1/0003:046D:C52B.0007/input/input19
hid-generic 0003:046D:C52B.0007: input,hiddev1,hidraw5: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-7.4/input1
hid-generic 0003:046D:C52B.0008: hiddev2,hidraw6: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-7.4/input2
intel_pch_thermal 0000:00:12.0: enabling device (0000 -> 0002)
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
nvidia: loading out-of-tree module taints kernel.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
i915 0000:00:02.0: enabling device (0000 -> 0003)
checking generic (6000000000 960000) vs hw (6013000000 1000000)
checking generic (6000000000 960000) vs hw (4000000000 10000000)
nvidia-nvlink: Nvlink Core is being initialized, major device number 234
nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
cryptd: max_cpu_qlen set to 1000
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
Adding 8000508k swap on /dev/nvme0n1p2. Priority:-2 extents:1 across:8000508k SSFS
snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
EXT4-fs (nvme0n1p4): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1400 audit(1615673809.546:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ippusbxd" pid=648 comm="apparmor_parser"
audit: type=1400 audit(1615673809.546:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=638 comm="apparmor_parser"
audit: type=1400 audit(1615673809.546:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=639 comm="apparmor_parser"
audit: type=1400 audit(1615673809.546:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=643 comm="apparmor_parser"
audit: type=1400 audit(1615673809.546:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=643 comm="apparmor_parser"
audit: type=1400 audit(1615673809.546:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=649 comm="apparmor_parser"
audit: type=1400 audit(1615673809.546:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=649 comm="apparmor_parser"
audit: type=1400 audit(1615673809.546:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=649 comm="apparmor_parser"
audit: type=1400 audit(1615673809.546:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=646 comm="apparmor_parser"
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 460.39 Thu Jan 21 21:54:06 UTC 2021
snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[drm] Initialized i915 1.6.0 20200114 for 0000:00:02.0 on minor 0
snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 460.39 Thu Jan 21 21:49:04 UTC 2021
[drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 1
i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
nvidia_uvm: module verification failed: signature and/or required key missing - tainting kernel
nvidia-uvm: Loaded the UVM driver, major device number 510.
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input21
i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input22
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC623: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x17/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x18
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
intel_rapl_common: Found RAPL domain uncore
intel_rapl_common: Found RAPL domain dram
vboxdrv: Found 20 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 3696098122 Hz
vboxdrv: Successfully loaded version 6.1.18 (interface 0x00300000)
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input28
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input23
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input29
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input30
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input24
logitech-djreceiver 0003:046D:C52B.0008: hiddev1,hidraw4: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-7.4/input2
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input31
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input32
input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input25
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input33
input: HDA NVidia HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input26
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input34
input: HDA NVidia HDMI/DP,pcm=12 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input27
input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input35
input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input36
input: Logitech Unifying Device. Wireless PID:406a Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7.4/1-7.4:1.2/0003:046D:C52B.0008/0003:046D:406A.0009/input/input37
input: Logitech Unifying Device. Wireless PID:406a Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7.4/1-7.4:1.2/0003:046D:C52B.0008/0003:046D:406A.0009/input/input38
input: Logitech Unifying Device. Wireless PID:406a Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7.4/1-7.4:1.2/0003:046D:C52B.0008/0003:046D:406A.0009/input/input39
input: Logitech Unifying Device. Wireless PID:406a System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7.4/1-7.4:1.2/0003:046D:C52B.0008/0003:046D:406A.0009/input/input40
hid-generic 0003:046D:406A.0009: input,hidraw5: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:406a] on usb-0000:00:14.0-7.4/input2:1
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
input: Logitech MX Anywhere 2S as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7.4/1-7.4:1.2/0003:046D:C52B.0008/0003:046D:406A.0009/input/input44
logitech-hidpp-device 0003:046D:406A.0009: input,hidraw5: USB HID v1.11 Keyboard [Logitech MX Anywhere 2S] on usb-0000:00:14.0-7.4/input2:1
NFSD: Using UMH upcall client tracking operations.
NFSD: starting 90-second grace period (net f00000a8)
snd_hda_intel 0000:00:1f.3: azx_get_response timeout, switching to polling mode: last cmd=0x0173a000
logitech-hidpp-device 0003:046D:406A.0009: HID++ 4.5 device connected.
logitech-hidpp-device 0003:046D:406A.0009: multiplier = 8
usb 1-6.2: New USB device found, idVendor=046d, idProduct=0843, bcdDevice= 0.13
usb 1-6.2: New USB device strings: Mfr=0, Product=2, SerialNumber=1
usb 1-6.2: Product: Logitech Webcam C930e
usb 1-6.2: SerialNumber: 327B656E
mc: Linux media interface: v0.10
videodev: Linux video capture interface: v2.00
usbcore: registered new interface driver snd-usb-audio
uvcvideo: Found UVC 1.00 device Logitech Webcam C930e (046d:0843)
uvcvideo 1-6.2:1.0: Entity type for entity Processing 3 was not initialized!
uvcvideo 1-6.2:1.0: Entity type for entity Extension 6 was not initialized!
uvcvideo 1-6.2:1.0: Entity type for entity Extension 8 was not initialized!
uvcvideo 1-6.2:1.0: Entity type for entity Extension 9 was not initialized!
uvcvideo 1-6.2:1.0: Entity type for entity Extension 10 was not initialized!
uvcvideo 1-6.2:1.0: Entity type for entity Extension 11 was not initialized!
uvcvideo 1-6.2:1.0: Entity type for entity Extension 12 was not initialized!
uvcvideo 1-6.2:1.0: Entity type for entity Extension 13 was not initialized!
uvcvideo 1-6.2:1.0: Entity type for entity Camera 1 was not initialized!
input: Logitech Webcam C930e as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.2/1-6.2:1.0/input/input45
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
snd_hda_intel 0000:00:1f.3: No response from codec, disabling MSI: last cmd=0x0173a000
e1000e 0000:00:1f.6 eno1: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x0173a000
rfkill: input handler disabled
rfkill: input handler enabled
rfkill: input handler disabled
logitech-hidpp-device 0003:046D:406A.0009: multiplier = 8
usb 1-6.2: reset high-speed USB device number 7 using xhci_hcd
SUPR0GipMap: fGetGipCpu=0x1b
vboxdrv: 0000000000000000 VMMR0.r0
VBoxNetFlt: attached to 'vboxnet0' / 0a:00:27:00:00:00
IPv6: ADDRCONF(NETDEV_CHANGE): vboxnet0: link becomes ready
device vboxnet0 entered promiscuous mode
vboxdrv: 0000000000000000 VBoxDDR0.r0
VMMR0InitVM: eflags=246 fKernelFeatures=0x0 (SUPKERNELFEATURES_SMAP=0)
device vboxnet0 left promiscuous mode
vboxnetflt: 121 out of 230 packets were not sent (directed to host)
kauditd_printk_skb: 18 callbacks suppressed
audit: type=1400 audit(1615676419.056:29): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=30049 comm="cups-browsed" capability=23 capname="sys_nice"
process 'marko/Apps/Geekbench-5.4.0-Linux/geekbench_x86_64' started with executable stack
logitech-hidpp-device 0003:046D:406A.0009: multiplier = 8